![]() LF Reject: Same as the DC-coupled limits for frequencies above 150kHz attenuates signals below 150kHzĬH1/CH2: ☘ divisions from center of screen HF Reject: Attenuates signals above 80kHz ![]() When vertical displacement is not zero, and N≥16: ± Add 2mV for settings from 2mV/div to 200mV/div add 50mV for settings from 200mV/div to 5V/divĭelta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditionsĮdge, Video, Pulse, Slope, Over time, AlternativeĭC, AC, Noise Reject, HF Reject, LF Rejectġdiv from DC to 10MHz 1.5div from 10MHz to 100MHz 2div from 100MHz to Full Ģ00mV from DC to 100MHz 350mV from 100MHz to 200MHz ġV from DC to 100MHz 1.75V from 100MHz to 200MHz When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div ☓% for Normal or Average acquisition mode, 5V/div to 10mV/div Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns) Ĩ-bit resolution, all channel sampled simultaneouslyĪnalog Bandwidth in Normal and Average modes at BNC or with probe, DC CoupledĢmV/div to 20mV/div, ±400mV 50mV/div to 200mV/div, ☒V Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns) If these values are exceeded, damage to the oscilloscope may occur.Ģ0ns/div to 80us/div (-8div x s/div) to 40ms Ģ00us/div to 40s/div (-8div x s/div) to 400s RMS signal level including all DC components removed through AC coupling must be limited to 300V. ![]() Excursion above 300V should be of less than 100ms duration. For non-sinusoidal waveforms, peak value must be less than 450V. Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. ![]() Wavefom Average, selectable 4,8,16,32,64,128ĬAT I and CAT II: 300VRMS (10×), Installation Category 1 x CD de Instalación, manual de instrucciones en ingles.Proporciona software para el análisis en tiempo real de PC o laptop, compatible Windows XP, Win 7, Win 8, Win 10.Cuatro funciones matemáticas estándar, incluyendo FFT.Conexión a puerto USB y conectividad del dispositivo. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |